You may see error messages of Error Code 8 presented when trying to use a device that is installed on your computer and the corresponding hardware is unresponsive. This error makes a distinct reference to the driver for the hardware, making the troubleshooting a bit simpler.
If you have been struggling to Resolve Error Code 8 problem, don’t hesitate to take a tour on this troubleshooting instruction, which will walk you through the necessary steps to completely fix the Hardware Failure problem stating “This device is not working properly because Windows cannot load the file that loads the drivers from the device. (Code 8) or Device failure: Try changing the driver for this device. If that doesn’t work see your hardware documentation. (Code 9) from your PC.”
OK, let’s directly refer to the following content to resolve Error Code 8, see if this works for you. If you need any other instruction towards a different problem, visit our homepage to search for the terms.
There could be a couple of versions of the error messages coming from this problem, so there are a couple of solutions for you to resolve Error Code 8.
1. The simplest one is to update the driver for a device. If you see this error code only when you are attempting to use a particular piece of hardware, update the corresponding driver through the device manager > Error Code 8 will display for many times with a button for you to perform the update > Hit the button and follow all the prompts to finish the update process > If you are able to use the hardware device without any error message, you have successfully fix the problem.
2. If the problem persists, some additional steps are needed to take. In most cases, you can access the Device Manager and remove the problem device > Then open the Control Panel and select Add New Hardware > Add the device again and reinstall the drivers > Follow all the prompts to make sure it will be correctly installed. This may resolve Error Code 8.
3. And there are some cases where a simple driver update or reinstallation fails to work. If the term “Devloader” is referenced in continued error messages, you may need to reinstall the Windows operating system. You will have to use your Windows installation disks and documentation, and go through the whole process step by step.
Note: A custom installation replaces the current version of your system and all personal files, so before reinstalling the Windows, make sure you have backed up all data you want to save on your computer, for example, your encrypted files. This is necessary in some cases, while this is the most drastic way to resolve Error Code 8.
How to Reinstall the Windows Operating System?
You can reinstall Windows 7 through the Recovery tool under Advanced recovery methods in Control Panel. This will reinstall the system from either a recovery image set by the computer manufacturer or the original Windows 7 installation files. You need to reinstall all the programs that you previously installed, and restore all your needed data from the backup copy. (See Choosing an advanced recovery method for more information.)
If Windows 7 fails to load at all, try to reinstall the system through your original Windows 7 installation disc. To resolve Error Code 8, please follow the instruction in “Using the Custom installation option and formatting the hard disk” earlier in this topic.
1. Power on your computer, after Windows normally loads, insert the DVD or USB flash drive, and restart your computer.
2. Press any key to boot from the DVD or USB flash drive.
If you reboot your computer and the current version of Windows loads, you will need to open a boot menu or change the boot order in your computer’s BIOS or UEFI settings, so that your computer can boot from the media. To do so, you will need to press a combination of keys (e.g. F2, F12, Delete, Esc, etc.) right after powering on your computer. (Check the documentation that came with your PC or go to the manufacturer’s official website for instructions on changing the boot order for your PC.)
If the current version of Windows still loads, you can wait again until it asks you to sign in, completely shut it down, then reboot your machine.
3. On the Install Windows page, select your language and other preferences, then hit the Next button.
4. Hit Install Windows.
5. On the Enter the product key to activate Windows page, put your product key into the box.
6. On the Please read the license terms page, hit I accept the license terms if you do, and click Next.
7. On the Which type of installation do you want? page, hit Custom.
8. On the Where do you want to install Windows? Page, follow either of these:
- On Windows 8.1, select the partition you want, tap the formatting option you want to perform if necessary, and follow the prompts.
- On Windows 8, tap Drive options (advanced), select the partition you want to change, tap the formatting option you want to perform if necessary, then follow the prompts.
9. After you finish the formatting, hit Next.
10. Follow the rest of the prompts to complete the reinstalling task and resolve Error Code 8.
See Update Windows 8 to Windows 8.1 for information about the update in the Official Windows Store.
How to Resolve Error Code 8 – Simpler Method
If you don’t trust your comprehension of computer knowledge, here is a perfect solution – using a professional and safe tool to take care of troubles for you.
1. Install the safe Registry repair tool by clicking the green download button on the page.
2. Run the tool, and click the Start Scan Now button to find all the existing issues on your system.
3. Hit the Fix All button to resolve Error Code 8 and other detected problems.
You can resolve Error Code 8 and other current problems found on your PC at the same time. Isn’t this much easier than you ever imagined?